Magicshine’s 2nd bike headlight with built in DRL (Daytime Running Light.) Ideal for both road and mountain with its highly adjustable brightness and flash modes at 200 – 2000 lumens.
Two front CREE XM-L2 V60 LEDs have slightly different roles, one has grated lens with a 25 degree beam spread while the other clear lens has an angle of 18 degrees. Each capable of 1000 lumens of actual output. Powered by 2x 18650 3500mAh cells into a Magicshine proprietary cartridge style battery pack. It is enough to power full beams, full brightness for up to one hour, 2 hours on single LED at 100%, and up to 14.5 hours on just the DRL.
Magicshine bike light has always been focusing on top performance with low to mid range pricing. This is Magicshine’s 2nd bike headlight with built in DRL (Daytime Running Light.) The Allty 2000 is similar to Allty 1000 in its design and functionality, with one additional LED and a battery almost twice the capacity. The DRL is always on when the light is on and this little 55 lumen light can drastically increase your visibility to oncoming traffic during daytime or night. The main light consists of two CREE XM-L2 V60 LEDs, each capable of 1000 lumens max. One of the lens is slightly grated so the spread is slightly wider at 25 degrees.
The Allty 2000 DRL bike light has 4 brightness modes at 10 – 25 – 50 – 100% and one flash mode, applicable to half beam(1xLED) or full beam(2xLEDs.) The battery uses a double cell cartridge that is locked onto the back of the light, easily unlocked with a coin. The cartridges can be exchanged on the fly as needed however the cells themselves are not removable. Runtime under a full charge ranges from 1 hour under full beam, full brightness to 14.5 hours with just the DRL active.
Built in OLED screen on this Magicshine bike light shows current light mode, intensity as well as remaining runtime. Outer shell is built to be highly water resistant at IPX5 including the OLED screen and USB charging port.
The mounting mechanism uses the standard Garmin style base, easily compatible with our TTA out front style mount. Handlebar mount comes with 3 lengths straps for different bar sizes and is secured with a hex key. After installation the mount stays on the bar. For helmet mounting option, please check out our Garmin helmet mount.